zbugz писал(а):Источник цитаты А инструкция по прошивке такая же как и на RT 6 ?
Почти, только на флешку надо записать папку "SMEG_IV2_UPG" со всем содержимым, без кавычек
zbugz писал(а):Источник цитаты И там только прошивка обновляется или вместе с картами ?
Без карт.
Карты те же что и в RT-6, только заранее сгенерируй ключ активации.
Отправлено спустя 39 минут 25 секунд:Вот инструкция на буржуйском про обновления , кто хочет может воспользоваться
https://translate.google.ru/1) Download the file
2) Get a good USB stick of 1Gb or more ( try to avoid cheap sticks at all cost; so use a Sandisk or so )
3) Format this stick and make it FAT32 filesystem
4) Use a good unpacker ( I use WinRAR ) to UNZIP the data to the CLEAN formatted FAT32 USB stick
5) in the root of the stick you put the folder SMEG_IV2_UPG ( so when you "explore" the USB driver you see just one folder "SMEG_IV2_UPG" )
6) go to the car and start the engine, turn of eco mode.
7) pull out existing USB devices and insert the stick
the SMEG will take 2-3 minutes to "recognize" the stick and then it ASKS you if you want to update; press YES
9) the SMEG prepares the system and after 6 minutes it reboots.
10) you keep the USB stick in the USB port -> the SMEG reboots 4-5 times total operation WHILE the engine is running! takes 15-18 minutes
11) the SMEG comes back to normal operation, now you can verify your FW (v6.1)
12) now you can switch of the engine; you are done
Whilst updating the SMEG ( steps 9-10 ) you see a "blue screen" with TEXT -> this is normal you can actually read the progress there.
Your MAPS and Speedcams are not deleted they remain in the unit; this file only changes / updates the operating system.
Will upload mirrors with zippyshare and filefactory tomorrow